The final stage of the setup involves the creation of a user profile. The accuracy of the QRMA report is highly dependent on the "Initial Calibration Data," which includes the subject's . In version 4.3.0, the database management system allows for more streamlined record-keeping, enabling practitioners to compare longitudinal data. Once the profile is set, a "test run" is recommended to ensure that the resonance signals from the hardware are being correctly interpreted by the software's spectral analysis engine.
Version 4.3.0 introduces several hardware and software enhancements over previous builds like 3.x. Quantum Resonance Magnetic Analyzer -4- 4.3.0 Setup
Insert the (often referred to as a "dongle" or "blue/silver key") into a separate USB port. The software will not open without this key. The final stage of the setup involves the
| Issue | Probable Cause | Solution | | :--- | :--- | :--- | | | Driver conflict. | Uninstall the driver in Device Manager, reboot PC, and reinstall using the specific driver folder from the CD. | | Software opens in Chinese | Language file reset. | Navigate to the installation folder C:\...\Quantum Resonance\ and delete the config.ini file. Restart the app; it may reset to default or allow you to select language. | | "Please Insert Key/Dongle" | Dongle not detected. | Remove the dongle, wait 5 seconds, and plug it into a different USB port. Wait for the drivers for the dongle to install. | | Test Values are abnormal | Poor contact or movement. | Ensure the hand is clean (no lotion). Ask the client to hold the sensor firmly but without squeezing. Retest. | | Error Code 003 | COM Port conflict. | Go to Device Manager > Ports (COM & LPT). Find the USB Serial Port. Right-click > Properties > Port Settings > Advanced. Change the COM Port Number to a lower number (e.g., COM2). | Once the profile is set, a "test run"
