Netset Pro-44 Scanner Manual Link

| Protocol | Baud Rate | Data Bits | Parity | Stop Bits | Pro-44 Preset # | |-------------------|-----------|-----------|--------|-----------|-----------------| | OBD-II (CAN) | 500k | 8 | None | 1 | P-01 | | OBD-II (J1850 VPW)| 10.4k | 8 | None | 1 | P-02 | | RS-232 Standard | 9600 | 8 | None | 1 | P-10 | | RS-485 Modbus RTU | 19200 | 8 | Even | 1 | P-14 | | IBM 3270 Coax | 2.358M | 8 | Odd | 1 | P-22 (special) | | Legacy HP-IB | 1M | 8 | None | 2 | P-30 |

| Test Mode | Menu Path | What It Does | |-----------|-----------|---------------| | | Main > Copper > Wiremap | Verifies pin-to-pin continuity (T568A/B) and detects shorts/opens. | | Length Measurement | Main > Copper > TDR | Measures cable distance via Time Domain Reflectometry. Requires NVP (Nominal Velocity of Propagation) value. | | RF Sweep | Main > RF > Sweep | Scans for signal strength across 400-2400 MHz. Use with the rubber duck antenna. | Netset Pro-44 Scanner Manual

Enter the of the range you want to search and press ENTER . Enter the Upper Frequency and press ENTER . | Protocol | Baud Rate | Data Bits

The scanner captures all data on the line without filtering. Use for unknown protocols. | | RF Sweep | Main > RF