Programming the Kirisun PT8100 using the software is a relatively straightforward process. Here's a step-by-step guide to get you started:
: Always start by clicking the "Read" button to download the current configuration from the radio. kirisun pt8100 programming software
If the radio has newer firmware than the software, it may refuse to read/write. Always try to use the most recent version of the KPR-8100 software. Programming the Kirisun PT8100 using the software is
To program a mobile radio, you need specific Customer Programming Software (CPS), a compatible programming cable, and the correct COM port drivers. 🛠️ Required Components Software : Use Kirisun PT8100 CPS (Common versions include v12 or v12.1 ). Always try to use the most recent version
| Column | What to enter | | :--- | :--- | | | 1 to 16 (PT8100 supports 16 channels maximum) | | RX Frequency | e.g., 462.562500 (for GMRS/FRS) or your repeater output | | TX Frequency | Usually same as RX for simplex; different for repeater (repeater input) | | QT/DQT Dec | CTCSS tone (e.g., 67.0 Hz) or DCS code (e.g., D023N) | | QT/DQT Enc | Usually same as Dec | | Power | High (H) or Low (L) | | Bandwidth | 12.5K (narrow) or 25K (wide) | | Scan | Add to scan list (Yes/No) |