📝 Are you looking at a shipping manifest, a product label, or an online database?
| Issue | Symptom | Probable Cause | Solution | | :--- | :--- | :--- | :--- | | | Machine pauses reporting "surface defect" when none exists | Slurry bubbles or dried slurry flakes on the platen | Increase slurry flow volume or adjust CCD threshold sensitivity via the "E" HMI. | | Carrier "E- - 18" Jamming | One of the 18 work carriers stops rotating; error code 18-07 | Worn carrier gear teeth or incorrect back pressure | Replace the polymer carrier ring. Check that pneumatic pressure does not exceed 12 psi. | | Thickness Variation | Parts from center carriers are thicker than edge carriers | Platen conditoning disc worn unevenly | Use the NANIWA auto-conditioning routine (30 min diamond disc run). | NANIWA DUP 09 CCD E- - 18
This report is for diagnostic guidance. Always refer to your specific model’s service manual for exact procedures. 📝 Are you looking at a shipping manifest,
April 24, 2026 Subject: Interpretation of Diagnostic Code from Naniwa Duplicator / Imaging Equipment Check that pneumatic pressure does not exceed 12 psi
If you could provide more specific details about the product, such as its exact application, features, or any other relevant information, I could offer a more precise and detailed response.
“Not a glitch,” Aiko muttered, pulling up the logs. “An erasure.”
A: In Naniwa’s coding system, dashes often indicate a "standard concentration" (C100) and a "standard shape" (Type 1A – cylindrical). The E may denote an economy bond with 25% less diamond for lower-cost applications.