Connect the printer via USB and turn it on (wait for a solid green light). Run the driver installer and select "Install printer drivers" If prompted for a model, look for "LABEL" or "LABEL-9X10". Configure for Reports/Labels: Printers & Scanners Printing Preferences Page Setup
A hospital needs tiny 9×10 mm vial labels with patient ID and a DataMatrix code. Solution: 300 DPI thermal-transfer printer, polyester labels with permanent adhesive, resin ribbon, ZPL template with DataMatrix at 10% margin, driver custom-size set to 9×10 mm, sensor calibrated to black mark, and batch verification via handheld scanner after every 50 labels.
Large labels require lower speeds. A quality 9x10 driver will allow you to drop from 6 inches per second (IPS) to . Running a 9x10 label at high speed causes vertical banding (stripes of missing print).
Because of its rectangular, low-profile design, you will find these drivers working hardest in:
, it indicates that the driver is correctly installed and recognized by the operating system. Understanding the "9x10" Driver