Intex It305wc Driver: Windows 10

If you encounter issues during the driver installation process, here are some troubleshooting tips to help you:

| Issue | Likely Cause | Solution | | :--- | :--- | :--- | | | USB port failure or cable damage | Try a different USB port (USB 2.0 preferred over USB 3.0 for legacy devices). Replace the USB cable. | | “Error 0xA00F4244 NoCamerasAreAttached” | Windows camera access disabled | Go to Settings > Privacy > Camera . Turn on “Allow apps to access your camera.” | | Green/pink static or garbled video | Incorrect driver (using Microsoft basic display driver) | Reinstall using the “Have Disk” method and force the Sonix generic driver. | | Microphone not working | Default audio device not set | Right-click speaker icon > Sounds > Recording tab. Set “USB Audio Device” as default. | | Driver installation fails with “哈希值不在指定目录中” (Hash mismatch) | Driver signature enforcement | Reboot and disable driver signature enforcement (see Step 2 above). | intex it305wc driver windows 10

A: No. Use the same generic driver method described for Windows 10. Windows 11 has stricter driver enforcement, so you will definitely need to disable signature enforcement. If you encounter issues during the driver installation

Since the IT-305WC was designed for Windows 7, you may need to "trick" the driver installer into thinking it's running on an older system: Turn on “Allow apps to access your camera

Check the box for "" and click Apply and OK . Run the installer and restart your computer if prompted. Alternative: Using the Generic UVC Driver