Datasheet link — Gyd-9e

| Parameter | Value | | :--- | :--- | | | InvenSense MPU-9250 (or MPU-9255) | | Axis | 9-Axis (Accel + Gyro + Mag) | | Communication | I2C (up to 400kHz) / SPI (optional) | | Accel Range | ±2g, ±4g, ±8g, ±16g | | Gyro Range | ±250, ±500, ±1000, ±2000 °/s (dps) | | Mag Range | ±4800 µT | | Voltage Input | 3.3V – 5V DC (Built-in LDO Regulator) | | Logic Level | 3.3V (5V tolerant I2C) | | Current Draw | ~3.7 mA (typical) | | I2C Address | 0x68 (Default), AD0 pin toggles to 0x69 | | Board Size | ~20mm x 16mm |

Requires soldering to the TV’s main power supply board to tap into the 12V-15V rail and the enable/dimming signals from the motherboard. GYD GYD-9E Placa Alimentación Tira LED TV LCD 11 - 20

A: No. It is a non-isolated buck converter. The input ground and output ground are common.

| Parameter | Value | | :--- | :--- | | | InvenSense MPU-9250 (or MPU-9255) | | Axis | 9-Axis (Accel + Gyro + Mag) | | Communication | I2C (up to 400kHz) / SPI (optional) | | Accel Range | ±2g, ±4g, ±8g, ±16g | | Gyro Range | ±250, ±500, ±1000, ±2000 °/s (dps) | | Mag Range | ±4800 µT | | Voltage Input | 3.3V – 5V DC (Built-in LDO Regulator) | | Logic Level | 3.3V (5V tolerant I2C) | | Current Draw | ~3.7 mA (typical) | | I2C Address | 0x68 (Default), AD0 pin toggles to 0x69 | | Board Size | ~20mm x 16mm |

Requires soldering to the TV’s main power supply board to tap into the 12V-15V rail and the enable/dimming signals from the motherboard. GYD GYD-9E Placa Alimentación Tira LED TV LCD 11 - 20

A: No. It is a non-isolated buck converter. The input ground and output ground are common.