Sc569-00 Ricoh [best] Jun 2026

The error is a protective mechanism, not a random annoyance. It signals that your printer’s fusing system has detected a dangerous temperature anomaly at the roller edge. In 90% of cases, replacing the fusing unit and performing an engine clear resolves the issue.

Pull the fuser unit out (be careful, it may be hot) and inspect the rear connectors. Ensure no pins are bent and that the unit "clicks" firmly into place when re-inserted. 4. Reset the SC Code (Service Mode) sc569-00 ricoh

Note: If the error persists, it is a "Level A" service call, which usually requires a technician to reset the code in System SP mode. 2. Inspect the Fuser Unit The error is a protective mechanism, not a random annoyance

Many Ricoh devices have SP 1-109-2 (Fuser Cleaning). Run this every 50,000 prints. Pull the fuser unit out (be careful, it

Turn off the power and check the fuser and paper exit areas for any scraps of paper that might be blocking the mechanism.